Gravel Driveway Calculator

Estimate gravel for a residential driveway in cubic yards, tons, and truckloads. Real density ranges, compaction and waste built in. The starter project below seeds a typical 30 ft × 12 ft driveway at 4 inches of crushed stone — change anything.

Runs 100% in your browser. Your input and files never leave your device.

Loading…

What it does

Pre-seeded with the canonical residential driveway

30 ft × 12 ft × 4 in of ¾" crushed stone, 20% compaction and 10% waste — the typical starting point for a single-car driveway. Edit any value to match your project.

Driveway-tuned compaction defaults

Driveways take more compaction than walkways or beds. The Driveway use-case preset sets compaction to 20% out of the box; you can dial it back for less-trafficked surfaces.

Multi-section driveways

Add regions for the main run, the turn-around, and a parking pad — each can have its own depth. The diagram shows the regions to scale; the result panel sums them.

Layered build for a long-lasting drive

Toggle Layered build for a base / middle / surface stack — the way real driveways are built. Each layer gets its own material, depth, and compaction; the order list shows what each delivery should carry.

How to use Gravel Driveway Calculator

  1. 1
    Type your driveway dimensions

    Length × width in feet (or meters). The seeded 30 × 12 covers a typical single-car residential drive. Add a region for the turn-around or parking pad if your driveway isn't a simple rectangle.

  2. 2
    Set the depth

    Most residential driveways need 4–6 inches of total gravel. 4 inches is a single-layer drive; 6+ inches with a base layer is more durable. The "Suggested depth" presets fill the field instantly.

  3. 3
    Pick the right gravel

    Crushed stone (¾" or #57) for the surface — angular grains lock together under traffic. Road base / DGA / quarry process for the base layer. Avoid pea gravel: rounded grains roll under tires.

  4. 4
    Confirm compaction and waste

    The Driveway preset sets 20% compaction and 10% waste — fine for most jobs. Bump compaction to 25% for heavily-trafficked surfaces; lower it if your sub-base is already solid.

  5. 5
    Order — read truckloads and cost

    Pick your delivery truck size (single-axle, tandem, tri-axle). The tool rounds up to whole loads. Enter your supplier's price per ton for total cost, including optional delivery fee and tax.

When to use this

Building a new gravel driveway

100 ft × 10 ft × 6 in with road base + crushed stone in two layers. The layered-build mode shows what each delivery truck should carry: base first, then surface.

Refreshing a tired driveway

Most refresh jobs only need a 1–2 inch top-up of fresh ¾" crushed stone. Type the existing area and a thin depth — the tool reports tons and truckloads to order.

Driveway with a turn-around

Add a circle region for the turn-around (20 ft diameter is typical), set its depth to match the main run. The diagram shows both regions; the order is the sum.

Common errors & fixes

My drive is a long rectangle but turns at the garage — how do I model it?
Add two regions: one for the long run, one for the angled section. The diagram shows them side by side; the order math is the sum. If the turn is curved, approximate with a circle region.
My supplier quoted a different ton total than this tool.
They're using a different density (or a different compaction assumption). Slide the density control in the material picker to match their number, or pick Custom and type it directly. The "density used" line shows what the tool is using.

Technical details

Driveway preset defaults20% compaction, 10% waste, 4 inch depth, ¾" crushed stone. Override any of them as you type.
Truckload sizingSingle-axle dump ≈ 7 yd³ (ideal for a small drive); tandem ≈ 13 yd³; tri-axle ≈ 18 yd³. The tool rounds up.

Frequently Asked Questions

How many tons of gravel do I need for a driveway?

For a typical 100 ft × 10 ft × 4 in residential driveway, you're looking at about 12 cubic yards or roughly 17 tons of crushed stone before compaction. After the typical 20% compaction + 10% waste, plan for closer to 22 tons.

How deep should a gravel driveway be?

4 inches minimum for a single-layer drive, 6–9 inches if you're doing a proper base + surface build. Heavier vehicles (RVs, work trucks) want the deeper build.

What gravel is best for a driveway?

¾" crushed stone or #57 stone for the surface — angular grains interlock under traffic. Road base (also called DGA, crusher run, or quarry process) for the compacted base. Avoid pea gravel for driveways: rounded grains don't hold under vehicle weight.

Should I order extra gravel for a driveway?

Yes — add 20% for compaction and 10% for waste, or about 30% over the bare-volume math. Driveway gravel settles harder than landscaping gravel because it has traffic on it. The Driveway preset in this calculator sets these defaults automatically.

How long does a gravel driveway last?

8–15 years for a properly-built driveway with a base layer; 3–5 years for a single-layer drive without a base. Replenishing the surface every 2–3 years extends both numbers.

Also useful: Compound Interest CalculatorStripe Fee Calculator