Pea Gravel Walkway Calculator

Estimate gravel for a garden path, walkway, or patio bedding. Pea gravel is the default — change it for crushed stone or decomposed granite. Seeded with a 20 ft × 3 ft path at 2 inches deep so you can start typing right away.

Runs 100% in your browser. Your input and files never leave your device.

Loading…

What it does

Pea gravel as default

Pea gravel is the most common walkway material — comfortable underfoot, decorative, and widely available bagged. The walkway preset starts here; switch to decomposed granite or crushed stone if you want a firmer surface.

Bag count — when bagged makes sense

For a 20 × 3 × 2 in walkway, you're looking at roughly 0.5 cubic yards — about 27 bags at 0.5 cu ft each. The tool shows both bulk and bagged options so you can pick.

Lower compaction defaults

Walkways don't take vehicle traffic, so 10% compaction + 10% waste is plenty — set automatically by the Walkway preset.

How to use Pea Gravel Walkway Calculator

  1. 1
    Type your path dimensions

    Length × width — most garden paths are 2–4 ft wide. The seeded 20 ft × 3 ft is a typical short connecting path; bump the length to match your actual run.

  2. 2
    Pick depth — 2 to 3 inches for walkways

    2 inches is the minimum for a stable walkway; 3 inches gives a softer feel underfoot. Decorative beds use the same range.

  3. 3
    Material: pea gravel or decomposed granite

    Pea gravel rolls slightly and is comfortable underfoot. Decomposed granite compacts to almost-pavement and feels firmer. The tool shows both density ranges so you know what you're ordering.

  4. 4
    Read the bag count

    Below half a cubic yard, bagged pea gravel from a big-box store is often the easier option. Above that, bulk delivery wins on price by a wide margin.

When to use this

A short connecting walkway

15 ft × 3 ft × 2 in of pea gravel = roughly 0.3 cu yd, or about 18 bags at 0.5 cu ft each. Plenty for a weekend project.

A long garden loop path

60 ft × 3 ft × 2 in of decomposed granite = closer to 1.1 cu yd. Order bulk delivery — bagged would cost 3–4× more per yard.

A patio gravel base

Use the calculator for the gravel layer under pavers or stones. 4 inches of crushed stone for the base, 1 inch of decomposed granite or sand for setting.

Common errors & fixes

My walkway curves — how do I measure it?
Approximate the curve as a rectangle — measure the centerline length and the average width. The volume math is forgiving; you don't need perfect geometry.

Technical details

Walkway preset defaults10% compaction, 10% waste, 2 inch depth, pea gravel.

Frequently Asked Questions

How much pea gravel do I need for a walkway?

For a 20 ft × 3 ft × 2 in walkway, you need about 0.5 cubic yards (roughly 0.7 tons or 27 bags at 0.5 cu ft each). The tool runs the math in real time as you type.

How deep should pea gravel be on a walkway?

2 inches is the minimum for stability; 3 inches gives a more comfortable underfoot feel. Going deeper than 3 inches makes pea gravel hard to walk on — your feet sink.

Is bagged pea gravel cheaper than bulk?

Almost always more expensive per cubic yard — typically 3–5× the price. Bulk wins past about a quarter cubic yard, but suppliers usually have a minimum order (3–5 tons) and a delivery fee. Below the minimum, bagged is the simpler option.

Can I use pea gravel for a driveway?

Not recommended. Pea gravel's rounded grains roll under tires and migrate into the surrounding lawn. Crushed stone (¾" or #57) is the right pick for driveways.

Pea gravel vs decomposed granite — which is better for a walkway?

Decomposed granite (DG) compacts to a firmer, more stable surface — better for high-traffic paths and ADA-compliant routes. Pea gravel is more decorative and softer underfoot but doesn't compact. Either works; pick based on the feel you want.

Also useful: Compound Interest CalculatorStripe Fee Calculator